 |
| Goodbye, friend. |
Saturday, September 4, 2010
Catching Up: Sold the 2006 GT...
I sold the 2006 Mustang GT a few weeks ago, using Craigslist. I didn't drive it much—usually driving the 2001 Bullitt when I needed a ride somewhere. Because I've been working from home the past five years, I don't commute daily so that reduces the need for a car (let alone three!)
The good news is that the new owners seemed very excited and appreciative and will take great care of the car from here.
Thursday, September 2, 2010
Carolina Classics at the Capital 2010
It was difficult to get pix because it was so crowded with people, but I got a few. There were some nice cars there, but only a couple Mustangs.
>> Check out my photo album (66 pix!)
Sunday, August 1, 2010
Have a Drink!
I've been messing around with things a bit (as I try to figure out how my intake manifold installation went awry—more on that later), so I delved into the fuel lines that connect the mechanical fuel pump to the QFT carb. I wanted to replace the hard line, various brass fittings, and the -8 carb fuel kit.
Although the old parts worked well enough, they looked a bit cobbled together, and the faded carb fuel kit leaked once in a while probably from being 7 or 8 years old. I think the hard line on the front of the engine seems like a good idea if you have a mechanical fan, or if the fuel line snakes around and through many pulleys and belts. Mine doesn't so I found some Russell and Edelbrock fuel parts featuring matching black anodizing, all in -6 AN sizing.
From the older Carter fuel pump I needed a Russell 660823 Black ProClassic 90 Degree Adapter Fitting
(-6 AN and 1/4" NPT) to replace the larger 3/8" NPT fitting or elbow that came with the Edelbrock 81234 ProClassic Fuel Line Kit. You might not need the smaller elbow depending on your fuel pump. Then I needed a Russell 660463 Black ProClassic Straight Adapter Fitting
(-6 AN and 3/8" NPT) to attach the line to the new Russell 641093 Dual Inlet Carburetor Kit (-6 AN with 1/8" NPT gauge plug for Holley 4150-style carb). This 641093 is advertised as not having a gauge plug in some stores and having one in others, mine does. I decided to add a fuel pressure gauge Auto Meter 2172 Autogage Mechanical Fuel Pressure Gauge (1/8" NPT).
The lines are a sufficient length, even with a taller-than-stock RPM Air Gap intake manifold. I didn't include an inline fuel filter, also black and from Russell, but maybe I will add it one day.
I used Permatex Thread Sealant 56521 on the NPT threads and spent about $75 on a pair of Aluminum fitting wrenches, and an adjustable one. I might have just taped up a regular wrench to handle tightening the anodized aluminum fittings, but my 2001 Bullitt has a full replacement -AN fuel system so I can use them there too. I think the black ProClassic lines look pretty good, and I might even be able to remove the carb fuel bowls with this style of "soft" carb fuel kit installed.
I should mention that regarding the Edelbrock 81234 ProClassic Fuel Line Kit, there seems to be a design change with the fitting that attaches the coupler to the braided line near the fuel pump. The larger fitting failed on mine when I installed it the second time, so after speaking with Edelbrock's Tech Line I returned it to Amazon. The smaller fitting in the image was sent to me as a replacement and appears to be the newer design and works fine. (Amazon doesn't seem to carry this line anymore, but other places do.)
Although the old parts worked well enough, they looked a bit cobbled together, and the faded carb fuel kit leaked once in a while probably from being 7 or 8 years old. I think the hard line on the front of the engine seems like a good idea if you have a mechanical fan, or if the fuel line snakes around and through many pulleys and belts. Mine doesn't so I found some Russell and Edelbrock fuel parts featuring matching black anodizing, all in -6 AN sizing.
From the older Carter fuel pump I needed a Russell 660823 Black ProClassic 90 Degree Adapter Fitting
(-6 AN and 1/4" NPT) to replace the larger 3/8" NPT fitting or elbow that came with the Edelbrock 81234 ProClassic Fuel Line Kit. You might not need the smaller elbow depending on your fuel pump. Then I needed a Russell 660463 Black ProClassic Straight Adapter Fitting (-6 AN and 3/8" NPT) to attach the line to the new Russell 641093 Dual Inlet Carburetor Kit (-6 AN with 1/8" NPT gauge plug for Holley 4150-style carb). This 641093 is advertised as not having a gauge plug in some stores and having one in others, mine does. I decided to add a fuel pressure gauge Auto Meter 2172 Autogage Mechanical Fuel Pressure Gauge (1/8" NPT).The lines are a sufficient length, even with a taller-than-stock RPM Air Gap intake manifold. I didn't include an inline fuel filter, also black and from Russell, but maybe I will add it one day.
I used Permatex Thread Sealant 56521 on the NPT threads and spent about $75 on a pair of Aluminum fitting wrenches, and an adjustable one. I might have just taped up a regular wrench to handle tightening the anodized aluminum fittings, but my 2001 Bullitt has a full replacement -AN fuel system so I can use them there too. I think the black ProClassic lines look pretty good, and I might even be able to remove the carb fuel bowls with this style of "soft" carb fuel kit installed.
I should mention that regarding the Edelbrock 81234 ProClassic Fuel Line Kit, there seems to be a design change with the fitting that attaches the coupler to the braided line near the fuel pump. The larger fitting failed on mine when I installed it the second time, so after speaking with Edelbrock's Tech Line I returned it to Amazon. The smaller fitting in the image was sent to me as a replacement and appears to be the newer design and works fine. (Amazon doesn't seem to carry this line anymore, but other places do.)
Subscribe to:
Posts (Atom)